Steering Wheel & Air Bag Module: Installation
- Align steering wheel so pin on contact reel is aligned with hole in steering wheel. Install steering wheel.
- Remove lock screw from contact reel and reinstall in original location. Ensure steering wheel is centered. Install steering wheel retaining bolt.
- Install air bag assembly. Tighten Torx bolts to specification. See TORQUE SPECIFICATIONS
table at end of article. Reconnect battery.
- Reactivate SRS. See DISABLING & ACTIVATING AIR BAG SYSTEM
. Check SRS warning light to ensure system is functioning properly. If an air bag warning light stays on, see appropriate AIR BAG RESTRAINT SYSTEM article in the ACCESSORIES/SAFETY EQUIPMENT section: