Abs Repair Precautions
WARNING: This page is about a different car, the 1989 Volvo 760 and 1989 Volvo 740. However, it is still accessible from the selected car via links, so may be relevant.
The following are precautions to observe when performing repair operations outside of ABS unit.
- DO NOT disconnect battery or electronic components with ignition switch in the "ON" position.
- Disconnect ECU connector when welding with an arch welder.
- When painting a vehicle, NEVER subject electronic control unit to temperatures above 180°F (82°C).
- Disconnect battery before charging with a fast charger. DO NOT use a fast charger to start engine.