Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Volkswagen >> 2025 >> ID.4 Pro S Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Driver Assistance Systems) >> 98 Assistance Systems >> Sensors And Control Modules >> Control Module for Adaptive Cruise Control -J428-, REMOVING AND INSTALLING >> Removing

Control Module for Adaptive Cruise Control -J428-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2025 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the VW emblem from the radiator grille. Refer to FRONT EMBLEMS, REMOVING AND INSTALLING .

-- Release the tabs -2-.

GWWN27-11238Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- At the same time, pivot the Control Module for Adaptive Cruise Control -J428- -1- out of the radiator grille in the -direction of the arrow-.

-- Release and disconnect the connector -3-.