Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Volkswagen >> 2021 >> Jetta R-Line, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Instruments System (Service Information)) >> 90 Instruments >> Instrument Cluster >> Outside Air Temperature Sensor, Removing And Installing >> Removing

Outside Air Temperature Sensor, Removing And Installing: Removing

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical equipment and remove the ignition key.

-- Remove the front bumper cover. Refer to FRONT BUMPER .

-- Release and disconnect the connector -1-.

GWWM90-10011Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the Outside Air Temperature Sensor -G17- -2- from the retainer on the impact member.

scientia non olet · About Mike's Workshop Manuals