Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Volkswagen >> 2021 >> Jetta R-Line, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Maintenance System (General Information)) >> Maintenance >> Procedure Descriptions >> Ball Joints And Axle Bearing, Visually Inspecting

Ball Joints And Axle Bearing, Visually Inspecting

WARNING: This page is about a different car, the 2018 Volkswagen Jetta, 2017 Volkswagen Jetta, 2016 Volkswagen Jetta, and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

-- Check ball joint boots -arrow- for leaks and damage.

GWWN01-10708Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Check the axle bearing -arrow- for the following damage:

GWWN01-10854Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
NOTE:

Rips and tears that are only on the surface such as small detachments between the rubber molded part and metal do not influence the function of the elastokinematic bearing and are not cause for concern.