Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Volkswagen >> 2021 >> ID.4 Pro, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 165 (Driver Assistance Systems) >> 98 Assistance Systems >> Sensors And Control Modules >> Lane Change Assistance Control Module -J769- /Lane Change Assistance Control Module 2 -J770-, REMOVING AND INSTALLING >> Removing

Lane Change Assistance Control Module -J769- /Lane Change Assistance Control Module 2 -J770-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Disengage the wiring harness -1-.

GWWN98-10049Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -2-.

-- Release the retainer -arrow-.

GWWN98-10050Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the control module -1-.

-- Remove the nut -1-. 

GWWN98-10051Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bracket -2-.