Front Sensor, Removing and Installing: Removing

Remove the front section of the front wheel housing liner. Refer to Wheel Housing Liner; Front Wheel Housing Liner, Removing and Installing.
Press both locking tabs in the direction of the -arrow A- and, at the same time, push the sensor -1- inward from the outside. -->
Release and disconnect the connector -2-.
Install in reverse order of removal and note the following:

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

CAUTION: An incorrect or damaged decoupling ring can lead to malfunctions.
Do not stretch the decoupling ring.
Replace any damaged decoupling rings and make sure the correct decoupling ring is installed.
Check the sensor -1- decoupling ring -3- for damage and replace it, if necessary.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE: Both sensor mount retaining brackets must engage audibly when installing the sensor.