Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Volkswagen >> 2014 >> Passat S, 1.8L Eng VIN T, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> 1.8L - Generic Scan Tool - Engine Code: CPRA [Transmission DTC Tables & Diagnostic Procedures] >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Procedures >> Fuel Pump Delivery Quantity, Checking >> Final Procedures

Final Procedures

After the repair work, the following work steps must be performed in the following sequence:

  1. Check the DTC memory. Refer to .
  2. If necessary, erase the DTC memory. Refer to .
  3. If the DTC memory was erased, generate readiness code. Refer to .
scientia non olet · About Mike's Workshop Manuals