Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Volkswagen >> 2011 >> Jetta Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 76 (Anti-Lock Brake System (SPORTWAGEN)) >> Anti-Lock Brake System >> Description And Operation >> Abs System Components On Rear Axle Assembly Overview, AWD

Abs System Components On Rear Axle Assembly Overview, AWD

WARNING: This page is about a different variant/trim than selected.
Fig 1: Exploded View Of ABS System Components On Rear Axle (All Wheel Drive)
GWWN45-10080Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
  1. ABS Wheel Speed Sensor
    • Before inserting sensor, clean inner surface of bore hole and coat with hot bolt paste G 052 112 A3.
    • Removal and installation, refer to REAR WHEEL SPEED SENSOR, AWD .
  2. Bolt, 8 Nm
  3. Wheel Bearing/Hub Unit
    • The ABS sensor ring is installed in the wheel bearing.
scientia non olet · About Mike's Workshop Manuals