3.2L - Generic Scan Tool - Engine Code(S): CBRA

• St Generic Scan Tool
  • General Information
    • Notes
    • Safety Precautions
    • Clean Working Conditions
    • On Board Diagnostic Systems
    • Malfunction Indicator Lamp Illumination
    • Controller Area Network Data Link
    • Electronic Power Control Warning Lamp
  • Description And Operation
    • Notes
    • Fuel Supply System
    • Evaporative Emission System
    • Electronic Engine Power Control
    • Fuel Injection System
    • Engine Control Module
    • Exhaust System Components
    • Ignition System
    • Automatic Transmission
  • Diagnosis And Testing
    • Preliminary Check
    • Readiness Code
    • Diagnostic Modes 01 - 09
      • Notes
      • Diagnostic Mode 01 - Read Current System Data
      • Diagnostic Mode 02 - Read Operating Conditions
      • Diagnostic Mode 03 - Read DTC Memory
      • Diagnostic Mode 04 - Erase DTC Memory
      • Diagnostic Mode 06 - Read Test Results For Specific Diagnostic Functions
        • Notes
        • Monitor-ID $01: Oxygen Sensor Monitor Bank 1 - Sensor 1
        • Monitor-ID $02: Oxygen Sensor Monitor Bank 1- Sensor 2
        • Monitor-ID 05 ($05): Oxygen Sensor Monitor Bank 2 - Sensor 1
        • Monitor-ID 06 ($06): Oxygen Sensor Monitor Bank 2 - Sensor 2
        • Monitor-ID 33 ($21): Catalyst Monitor Bank 1
        • Monitor-ID 34 ($22): Catalyst Monitor Bank 2
        • Monitor-ID 58 ($3A): Fuel Tank EVAP System Leak Test (0.090")
        • Monitor-ID 59 ($3B): EVAP Monitor (0.040)
        • Monitor-ID 60 ($3C): EVAP Monitor (0.020)
        • Monitor-ID 61 ($3D): Purge Flow Monitor
        • Monitor-ID 65 ($41): Oxygen Sensor Heater Monitor Bank 1 - Sensor 1
        • Monitor-ID 66 ($42): Oxygen Sensor Heater Monitor Bank 1 - Sensor 2
        • Monitor-ID 69 ($45): Oxygen Sensor Heater Monitor Bank 2 - Sensor 1
        • Monitor-ID 70 ($46): Oxygen Sensor Heater Monitor Bank 2 - Sensor 2
        • Monitor ID 113 ($71): Secondary Air Injection (AIR) System (Bank 1)
        • Monitor ID 114 ($72): Secondary Air Injection (AIR) System (Bank 2)
        • Monitor-ID 162 ($A2): Misfire Cylinder 1 Data
        • Monitor-ID 163 ($A3): Misfire Cylinder 2 Data
        • Monitor-ID 164 ($A4): Misfire Cylinder 3 Data
        • Monitor-ID 165 ($A5): Misfire Cylinder 4 Data
        • Monitor-ID 166 ($A6): Misfire Cylinder 5 Data
        • Monitor-ID 167 ($A7): Misfire Cylinder 6 Data
      • Diagnostic Mode 07 - Read Faults Detected During The Current Or Last Driving Cycle
      • Diagnostic Mode 08 - Request Control Of On-Board System, Test Or Component
      • Diagnostic Mode 09 - Read Vehicle Information
    • DTC Tables
    • Diagnostic Procedures
      • Fuel Pump Checking
      • Fuel Delivery, Checking
      • EVAP System, Detecting Leaks
      • EVAP System Leak Checking
      • EVAP Canister Purge Regulator Valve Checking
      • Leak Detection Pump Checking
      • Throttle Position Sensor And Accelerator Pedal Position Sensor 2 Checking
      • Oxygen Sensor Bank 1 Sensor 1 Heater Checking
      • Oxygen Sensor Bank 2 Sensor 1 Heater Checking
      • Oxygen Sensor Bank 1 Sensor 2 Heater Checking
      • Oxygen Sensor Bank 2 Sensor 2 Heater Checking
      • Mass Air Flow Sensor/Intake Air Temperature Sensor Checking
      • Throttle Valve Control Module Checking
      • Positive Crankcase Ventilation Heating Element Checking
      • Engine Coolant Temperature Sensor Checking
        • Notes
        • Testing if display is approx. - 40.0°C:
        • Testing if display approx. 140.0°C:
        • Checking wiring
        • Final procedures
      • Engine Coolant Temperature Sensor On Radiator, Checking
      • Electric Coolant Pump Checking
      • Engine Speed Sensor Checking
      • Intake Manifold Runner Control Valve Checking
      • Exhaust Flap Valve 1 Checking
      • Fuel Injector, Checking
      • Heated Oxygen Sensor Bank 1 Sensor 1 Checking
      • Heated Oxygen Sensor Bank 2 Sensor 1 Checking
      • Heated Oxygen Sensor Bank 1 Sensor 2 Checking
      • Heated Oxygen Sensor Bank 2 Sensor 2 Checking
      • Engine Control Module Voltage Supply, Checking
      • Engine Control Module Power Supply Relay Checking
      • Power Supply Relay, Terminal 30, B+ Checking
      • Auxiliary Engine Coolant Pump Relay Checking
      • Engine Control Module Replacing
      • Speed Signal, Checking
      • Can-Bus Terminal Resistance, Checking
      • Three Way Catalytic Converter, Checking
      • Secondary Air Combination Valve, Checking
      • Secondary Air Injection Solenoid Valve Checking
      • Secondary Air Injection Solenoid Valve 2 Checking
      • Secondary Air Injection Pump Motor Checking
      • Secondary Air Injection Sensor 1 Checking
      • Secondary Air Injection Pump Relay Checking
      • Camshaft Position Sensor 1 Checking
      • Camshaft Position Sensor 2 Checking
      • Intake Camshaft Adjustment Valve Bank 1 Checking
      • Exhaust Camshaft Adjustment Valve Bank 1 Checking
      • Knock Sensor 1 Checking
      • Knock Sensor 2 Checking
      • Ignition Coils With Power Output Stage, Checking