Servicing 5 SPD. Automatic Transmission 01L

• 00 General, Technical Data
  • Note for this article
    • Note for this article
    • General Repair Notes
    • Special tools
  • Rules of cleanliness for working on automatic transmissions
    • Rules of cleanliness for working on automatic transmissions
  • Frequent damages
    • Reverse gear without traction
    • Hard shifting, slipping problems in 4th and 5th gear
    • Slipping problems in 4th and 5th gear, ATF pump noise
    • All gears without slipping
    • Shifting to reverse gear approx. 5 to 6 seconds delayed after selecting driving mode
• 32 Torque converter
  • Torque converter
    • Torque converter clutch friction lining, checking
    • Torque converter, draining
    • Torque converter, checking
• 37 Automatic Transmission - Controls, Housing
  • Transmission, attaching to assembly stand
  • Planetary gear, disassembling and assembling
    • Planetary gear, disassembling and assembling
    • Planetary gear, assembly overview
  • Clutch "F" with free-running hub. disassembling and assembling
    • Clutch "F" with free-running hub, assembly overview
    • Clutch "F" , disassembling
    • Freewheel, disassembling
    • Freewheel, assembling
    • Clutch "F" , assembling
  • Tower "I", disassembling and assembling
    • Clutch "C" with sun shaft, assembly overview
    • Clutch "C" with sun shaft, disassembling and assembling
    • Clutch "D" , assembly overview
    • Clutch "E" - component overview
    • Clutch "D/E" , disassembling and assembling
    • Planetary drive, assembly overview
    • Planetary drive, disassembling and assembling
    • Assembling tower "I"
  • Tower "II", disassembling and assembling
    • Tower "II" , assembly overview
    • Tower "II" , disassembling
    • Clutch "A" , assembly overview
    • Clutch "A" , disassembling and assembling
    • Clutch "B" , assembly overview
    • Clutch "B" , disassembling and assembling
    • Tower "II" , assembling
  • Shift rod, removing and installing
    • Shift rod, removing and installing
• 39F Final drive, Differential (front)
  • ATF pump, disassembling and assembling
    • ATF pump, assembly overview
    • ATF pump, disassembling and assembling
    • Stator shaft, removing and installing
    • Volume controlling valve in ATF pump, checking
  • Oil tubes
    • ATF oil tubes, removing and installing
    • Oil tube for rear final drive, removing and installing
  • Transmission components, evaluating wear
    • Evaluating wear by evaluating ATF color and impurities
      • ATF color
      • Shavings in ATF
      • Measures for contaminated ATF area
    • Clutch "F" with freewheel
      • Notes
      • Checking rotating and locking direction of freewheel
      • Checking coated and outer plate for wear
      • Checking piston "F" for deformation or damaged sealing lips
      • Checking freedom of movement of valve ball in cylinder "F"
      • Signs of wear at cylinder "F" caused by coated plate
    • Clutch "C" with sun shaft
      • Notes
      • Checking coated and outer plate for wear
      • Checking freedom of movement of valve ball in piston "C"
      • Signs of wear at inner circumference of cylinder "C" caused by coated plate
      • Signs of wear at outer circumference of cylinder "C" caused by coated plate
      • Checking brass sleeves of sun shaft for wear
      • Checking rectangular rings for wear
    • Clutch "D"
      • Notes
      • Checking coated and outer plate for wear
      • Signs of wear at cylinder "D/E" caused by coated plate
      • Checking metal sleeve for wear in cylinder "D/E"
      • Checking freedom of movement of valve ball in cylinder "D/E"
    • Clutch "E"
      • Notes
      • Checking freedom of movement of valve ball in cylinder "D/E"
      • Checking coated and outer plate for wear
    • Planetary drive
      • Notes
      • Checking outer splines of plate carrier "E" for notches caused by coated plate
      • Checking needle bearing of shaft planetary carrier "I" for wear
      • Checking contact surfaces, brass sleeve and needle bearing of shaft planetary carrier "II" for wear
      • Checking contact surfaces, brass sleeve and needle bearing of shaft planetary carrier "III" for wear
    • Clutch "A"
      • Notes
      • Checking rectangular rings for wear
      • Checking contact surface of shaft cylinder "A" for wear
      • Checking coated and outer plate for wear
    • Clutch "B"
      • Notes
      • Checking coated and outer plate for wear
    • ATF pump
      • Notes
      • Checking components of ATF pump for grooves and signs of wear
      • Checking coupling plate in pump wheel
      • Checking brass sleeve of stator shaft for wear
      • Checking rectangular rings for wear
• 39R Final drive, Differential (rear)
  • Final drive, rear differential, servicing