Front Floor Console Armrest Removal And Installation/Replacement

Mobile Repair Possible:  Van/Car

Removal Procedure: 

1. Remove front floor console rear upper cover. Refer to FRONT FLOOR CONSOLE REAR UPPER COVER REMOVAL AND INSTALLATION/REPLACEMENT 
2. Remove 4 screws (1).

   Torque: 2 Nm 

3. Open and remove the armrest (2).

Installation Procedure: 

1. Installation is the reverse of removal procedure, noting the following.

   All fasteners must be tightened to torque specification! 

2. Install front floor console rear upper cover. Refer to FRONT FLOOR CONSOLE REAR UPPER COVER REMOVAL AND INSTALLATION/REPLACEMENT