Caution / Notice / Hint
NOTE:
- When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
- If the forward recognition camera has been replaced with a new one, be sure to perform forward recognition camera adjustment and clear the vehicle control history for each system.
HINT:
Forward recognition camera adjustment can be performed by using either "One Time Recognition" or "Sequential Recognition".
One Time Recognition: Refer to ADJUSTMENT (ONE TIME RECOGNITION) [06/2020 - 12/2021] , or refer to ADJUSTMENT (ONE TIME RECOGNITION) [12/2021 - 10/2022]
Sequential Recognition: Refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [06/2020 - 12/2021] , or refer to ADJUSTMENT (SEQUENTIAL RECOGNITION) [12/2021 - 10/2022]
- When the forward recognition camera is replaced, update the ECU security key.
Refer to UPDATE ECU SECURITY KEY [06/2020 - ]
- When replacing the hybrid vehicle control ECU, refer to Service Bulletin.
- When the hybrid vehicle control ECU is replaced, update the ECU security key.
Refer to UPDATE ECU SECURITY KEY [06/2020 - ]