Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2025 >> Crown Signia XLE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - Service Information >> AIR FUEL RATIO SENSOR (for Sensor 2) >> Removal [06/2024 - ] >> Procedure

Removal [06/2024 - ]: Procedure

  1. REMOVE NO. 2 AIR FUEL RATIO SENSOR 
    1. GTY1150201Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Detach the 2 wire harness clamps.
      2. Disconnect the No. 2 air fuel ratio sensor connector.
      3. Using SST, remove the No. 2 air fuel ratio sensor from the front exhaust pipe assembly.
        • SST: 09224-00012 
        NOTE:

        If the air fuel ratio sensor has been struck or dropped, replace it.

scientia non olet · About Mike's Workshop Manuals