Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2024 >> Tacoma TRD Pro >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Stop And Start System - Service Information >> Vacuum Sensor Assembly >> On-Vehicle Inspection [12/2023 - ] >> Procedure

On-Vehicle Inspection [12/2023 - ]: Procedure

  1. INSPECT VACUUM SENSOR ASSEMBLY 
    1. Start the engine.
    2. Turn the ignition switch off.
    3. According to the display on the GTS, read the Data List.

      Powertrain > Stop and Start > Data List 

      Tester Display
      Brake Boost Pressure
    4. Compare the "Brake Boost Pressure" values before and after the brake pedal was depressed 5 times.

      Standard

      Internal pressure changes by 20 kPa (150 mmHg, 5.91 in.Hg) or more.

      HINT: 

      • Standard atmospheric pressure is 101 kPa (758 mmHg, 29.8 in.Hg).
      • For every 100 m (328 ft.) increase in altitude, atmospheric pressure drops by 1 kPa (8 mmHg, 0.295 in.Hg).
      • Atmospheric pressure varies with weather.