Installation [12/2022 - ]: Procedure
- INSTALL MASS AIR FLOW METER SUB-ASSEMBLY
Torque: 0.97 N.m (10 kgf/cm, 9 in.lbf)
NOTE:- If the mass air flow meter sub-assembly has been struck or dropped, replace it.
- If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.
- Make sure that the O-ring is not cracked or moved out of place when installing the mass air flow meter sub-assembly.
- PERFORM INITIALIZATION
- Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.
Refer to INITIALIZATION [12/2022 - ]
- Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.