Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2023 >> Sequoia TRD Pro >> Repair and Diagnosis >> External Pages >> Different car >> Section 68 (Navigation System - Service Information) >> Navigation Receiver >> Installation [09/2014 - 11/2017] >> Procedure

Installation [09/2014 - 11/2017]: Procedure

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2024 Lexus RC 350, 2024 Lexus RC 300, 2023 Lexus RC 350, 2023 Lexus RC 300, and 2022 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL RADIO RECEIVER ASSEMBLY 
  2. INSTALL NO. 1 RADIO BRACKET 

    Refer to PROCEDURE - Step 2

  3. INSTALL NO. 2 RADIO BRACKET 

    Refer to PROCEDURE - Step 3

  4. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET 

    Refer to PROCEDURE - Step 4

  5. INSTALL CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 5

  6. INSTALL FRONT PANEL GARNISH RH 

    Refer to PROCEDURE - Step 8

  7. INSTALL FRONT PANEL GARNISH LH 

    Refer to PROCEDURE - Step 9

  8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH 

    Refer to PROCEDURE - Step 10

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH 

    Refer to PROCEDURE - Step 11

  10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 12

  11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [09/2014 - 10/2015] , or refer to INITIALIZATION [10/2015 - 11/2017]

scientia non olet · About Mike's Workshop Manuals