Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2023 >> Sequoia TRD Pro >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Power Distribution System - Service Information) >> Integration Relay >> Installation [09/2014 - ] >> Procedure

Installation [09/2014 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2024 Lexus RC 350, 2024 Lexus RC 300, 2023 Lexus RC 350, 2023 Lexus RC 300, and 2022 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL SEMICONDUCTOR POWER INTEGRATION ECU 
    1. Connect the 5 connectors.
    2. Engage the 2 claws to install the semiconductor pwr integration ECU as shown in the illustration.
      GTY502345Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL NO. 2 RELAY BLOCK COVER 
    1. Engage the 2 claws (B).
      GTY498544Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the claw (A) to install the No. 2 relay block cover as shown in the illustration.
  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [09/2014 - 10/2015] , or refer to INITIALIZATION [10/2015 - 11/2017] , or refer to INITIALIZATION [11/2017 - 10/2018] , or refer to INITIALIZATION [10/2018 - 09/2020] , or refer to INITIALIZATION [09/2020 - 10/2022] , or refer to INITIALIZATION [10/2022 - 10/2023] , or refer to INITIALIZATION [10/2023 - ]

scientia non olet · About Mike's Workshop Manuals