Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2023 >> Sequoia TRD Pro >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Lighting System (Ext) - Service Information) >> Automatic Light Control Sensor >> Removal [09/2014 - ] >> Procedure

Removal [09/2014 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 21 other vehicles, including the 2024 Lexus RC 350, 2024 Lexus RC 300, 2023 Lexus RC 350, 2023 Lexus RC 300, and 2022 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 

    Refer to REMOVAL [09/2014 - 11/2017] , or refer to REMOVAL [11/2017 - 10/2018] , or refer to REMOVAL [10/2018 - 11/2019] , or refer to REMOVAL [11/2019 - 10/2022] , or refer to REMOVAL [10/2022 - ]

  2. REMOVE AUTOMATIC LIGHT CONTROL SENSOR 
    1. GTY467934Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Disconnect the connector.

    2. Disengage the 2 claws to remove the automatic light control sensor.