Registration [10/2024 - ]: Procedure

LIST

Work Support item	Contents	Remarks
Entry VIN	V.I.N can be registered.	Ignition switch ON (engine OFF)
Evaporative System Check	Forces the ELCM to operate to perform an EVAP system diagnosis.	Execution conditions Ignition switch ON (engine OFF) Battery voltage: 10.9 V or higher [Coolant Temp.]: 4.4°C (39.92°F) - 35°C (95°F) [Intake Air Temp.]: 4.4°C (39.92°F) or higher [Oil Temperature]: 4.5°C (40°F) or higher HINT: Refer to inspection mode I for an operation overview. Refer to SYSTEM NORMAL CONDITION CHECK [10/2024 - ] The evaporative system check completes approximately 15 minutes after the test starts, but may take up to approximately 30 minutes when the fuel tank is full. When the fuel tank is full, the test results may be inaccurate.
Vehicle Control History (RoB)	A history of maximum vehicle speed and maximum engine speed (overspeed) can be displayed.	For the execution conditions, refer to the Vehicle Control History (RoB). To delete the history, click the operation history clear button.(Not deleted by battery removal or DTC memory clear.)

Work Support item

Contents

Remarks

Entry VIN

V.I.N can be registered.

Ignition switch ON (engine OFF)

Evaporative System Check

Forces the ELCM to operate to perform an EVAP system diagnosis.

Execution conditions

HINT:

Refer to inspection mode I for an operation overview.
Refer to SYSTEM NORMAL CONDITION CHECK [10/2024 - ]
The evaporative system check completes approximately 15 minutes after the test starts, but may take up to approximately 30 minutes when the fuel tank is full.
When the fuel tank is full, the test results may be inaccurate.

Vehicle Control History (RoB)

A history of maximum vehicle speed and maximum engine speed (overspeed) can be displayed.

For the execution conditions, refer to the Vehicle Control History (RoB).
To delete the history, click the operation history clear button.(Not deleted by battery removal or DTC memory clear.)