Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2022 >> GR86 Base, Standard Trans >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System - Diagnostics - Introduction >> Power Window Control System >> Utility [11/2021 - ] >> Utility [11/2021 - ]

Utility [11/2021 - ]

  1. SYSTEM INITIALIZATION 

    Perform this procedure when top dead position or bottom dead position becomes misaligned or when instructed in the diagnostic procedure.

    With this procedure, the following data can be initialized.

    • Top dead position
    • Bottom dead position
    • Sliding resistance value
    • DTC/FFD
    • Data list history items

      HINT: 

      Record the DTCs and FFD because they will be erased when the initialization is performed.

    1. Perform System Initialization according to the display on the GTS.

      Body Electrical > Power Window (Driver) > Utility 

      Tester Display
      System Initialization

      Body Electrical > Power Window (Passenger) > Utility 

      Tester Display
      System Initialization
  2. CLEARING HISTORY 

    With this procedure, the following data can be initialized.

    • Data list history items
    1. Perform Record Clear according to the display on the GTS.

      Body Electrical > Power Window (Driver) > Utility 

      Tester Display
      Record Clear

      Body Electrical > Power Window (Passenger) > Utility 

      Tester Display
      Record Clear
scientia non olet · About Mike's Workshop Manuals