Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2021 >> Tundra Trail, RWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control / Dynamic Control Systems (Service Information) >> VSC Off Switch >> Removal [08/2015 - 08/2017] >> Procedure

Removal [08/2015 - 08/2017]: Procedure

  1. REMOVE INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 5

  2. REMOVE FRONT DOOR SCUFF PLATE LH 
    1. for Double Cab:

      (Refer to PROCEDURE - Step 7 )

    2. for CrewMax:

      (Refer to PROCEDURE - Step 9 )

    3. for Regular Cab:

      (Refer to PROCEDURE - Step 5 )

  3. REMOVE COWL SIDE TRIM BOARD LH 

    Refer to PROCEDURE - Step 11

  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 11

  5. REMOVE NO. 2 SWITCH HOLE BASE 

    Refer to PROCEDURE - Step 16

  6. REMOVE VSC OFF SWITCH 
    1. Disconnect the VSC OFF switch connector.
    2. Using a screwdriver, detach the 2 claws and remove the VSC OFF switch from the No. 2 switch hole base.
      GTY569666Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals