Installation [08/2015 - 08/2017]: Procedure
- INSTALL TRAILER BRAKE CONTROL ECU (BRAKE CONTROL WITH BRACKET RELAY)
- Connect the connector.
- Install the trailer brake control ECU (brake control with bracket relay) with the 2 bolts.
Torque: 3.5 N*m (36 kgf*cm, 31 in.*lbf)
- INSTALL NO. 2 SWITCH HOLE BASE
Refer to PROCEDURE - Step 25
- INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH
Refer to PROCEDURE - Step 30
- INSTALL COWL SIDE TRIM BOARD LH
Refer to PROCEDURE - Step 27
- INSTALL FRONT DOOR SCUFF PLATE LH
- for Double Cab:
(Refer to PROCEDURE - Step 31 )
- for CrewMax:
(Refer to PROCEDURE - Step 32 )
- for Regular Cab:
(Refer to PROCEDURE - Step 21 )
- for Double Cab:
- INSTALL INSTRUMENT SIDE PANEL LH
Refer to PROCEDURE - Step 36