Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2021 >> Tacoma TRD Pro, Automatic Trans >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System Warning Buzzer - Service Information >> Pre-Collision System Warning Buzzer >> Installation [11/2017 - ] >> Procedure

Installation [11/2017 - ]: Procedure

  1. INSTALL SKID CONTROL BUZZER 
    1. Connect the connector.
    2. Engage the clamp to install the skid control buzzer.
      NOTE:

      If the skid control buzzer has been struck or dropped, replace it with a new one.

      HINT: 

      Make sure to install the skid control buzzer in the correct direction.

scientia non olet · About Mike's Workshop Manuals