Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2021 >> Tacoma TRD Pro, Automatic Trans >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System - Diagnostic Codes & Circuit Tests >> Pre-Collision System >> DTC C1AA9: Front Camera Module Beam Axis Not Adjusted [11/2017 - ] >> Procedure

DTC C1AA9: Front Camera Module Beam Axis Not Adjusted [11/2017 - ]: Procedure

  1. GO TO FORWARD RECOGNITION CAMERA SYSTEM 

    HINT: 

    If DTC C1AA9 is output by the pre-collision system, perform troubleshooting for the forward recognition camera system.

    Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2017 - ]

    Result

    Proceed to
    NEXT

    Result: 

    NEXT 

    END 

scientia non olet · About Mike's Workshop Manuals