Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2021 >> Supra Base, 2.0L Eng VIN 2 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (B46) - Service Information >> Mass Air Flow Meter >> Removal [07/2020 - ] >> Procedure

Removal [07/2020 - ]: Procedure

  1. REMOVE INTAKE MASS AIR FLOW METER SUB-ASSEMBLY 
    NOTE:
    • Electrostatic discharge.

      Damage to or destruction of electrical components.

      • Only touch the housings of electrical components. Do not touch pins or multi-pin connectors directly.
      • For additional information see:

        Refer to PRECAUTION [03/2019 - ]

    1. Unlock plug connection (1) and disconnect.
      GTY994499Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Loosen T20 screws (2).
    3. Remove the intake mass air flow meter sub-assembly (3).
scientia non olet · About Mike's Workshop Manuals