Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2021 >> Supra Base, 2.0L Eng VIN 2 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (B46) - Service Information >> Mass Air Flow Meter >> Installation [07/2020 - ] >> Procedure

Installation [07/2020 - ]: Procedure

  1. INSTALL INTAKE MASS AIR FLOW METER SUB-ASSEMBLY 
    1. Install the intake mass air flow meter sub-assembly (3).
      GTY994499Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Tighten down T20 screws (2).

      Torque: 1.4 N*m (14 kgf*cm, 12 in.*lbf) 

    3. Connect connectors (1) and lock.
  2. PERFORM INITIALIZATION 
    1. Connect the diagnosis system to the vehicle and enter the following menus:

      Vehicle management / Service functions / Drive / Engine electronics / Reset adaptations / ABL Reset adaptation values

scientia non olet · About Mike's Workshop Manuals