Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2021 >> Sequoia TRD Pro >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Service Information) >> VSC Off Switch >> Inspection [08/2015 - ] >> Procedure

Inspection [08/2015 - ]: Procedure

  1. INSPECT TRACTION CONTROL SWITCH 
    GTY244937Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      6 - 9 Switch is pressed Below 1 Ω
      Switch is not pressed 10 kΩ or higher

      If the result is not as specified, replace the traction control switch.

scientia non olet · About Mike's Workshop Manuals