Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2021 >> Sequoia TRD Pro >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Wireless Door Lock Control System - Diagnostics - Introduction >> Wireless Door Lock Control System >> Customize Parameters [08/2015 - 08/2017] >> Procedure

Customize Parameters [08/2015 - 08/2017]: Procedure

  1. CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM 
    1. Customizing with the Techstream

      HINT: 

      The following items can be customized.

      NOTE:
      • After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
      • Be sure to record the current settings before customization.
      • When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization (Example: For the system, "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting).
      1. Connect the Techstream to the DLC3.
      2. Turn the ignition switch to ON.
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Wireless Door Lock.
      5. Select the setting by referring to the table below.
        WIRELESS DOOR LOCK

        Display (Item) Default Content Setting
        Wireless Control ON ON/OFF of wireless door lock function ON/OFF
        Hazard Answer Back ON When LOCK switch on transmitter pressed, all hazard warning lights illuminate once. When UNLOCK switch pressed, all hazard warning lights illuminate twice ON/OFF
        Wireless Buzzer Resp ON Function that makes wireless buzzer sound for answer-back when transmitter LOCK/UNLOCK switch pressed ON/OFF
        Open Door Warning ON If door is not completely closed and transmitter LOCK switch is pressed, this function sounds a buzzer for 10 seconds ON/OFF
        Unlock 2 Operation ON Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice. If setting is OFF, pressing unlock switch once makes all doors unlock. ON/OFF
        Panic Function ON This function operates the theft deterrent system when PANIC is pressed and held for 0.8 second or more. ON/OFF
        Auto Lock Time 60s This function controls amount of time from unlocking doors to automatic re-locking function. 30s/60s/120s
        Wireless Auto Lock ON Function of automatically looking doors after unlocking doors with wireless key. ON/OFF