How To Proceed With Troubleshooting [08/2015 - 08/2017]: Procedure

Result

Result: 

NEXT 

See step  2

Result

Result: 

NEXT 

See step  3

1. Check for output DTCs.

   Result

   Result	Proceed to
   CAN DTC is not output	A
   CAN DTC is output	B

   HINT: 

   The ECM of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, make sure to check that there is no trouble in the CAN communication system.

Result: 

B 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [08/2015 - 08/2017] 

Result: 

A 

See step  4

Refer to DTC Check/Clear.

Refer to DTC CHECK / CLEAR [08/2015 - 08/2017] 

Result

Result: 

NEXT 

See step  5

Result

Result: 

B 

GO TO DTC CHART. Refer to  DIAGNOSTIC TROUBLE CODE CHART [08/2015 - 08/2017]  

Result: 

A 

See step  6

Result

Result: 

B 

See step  9

Result: 

A 

See step  7

Refer to Electronic Circuit Inspection Procedure.

Refer to ELECTRONIC CIRCUIT INSPECTION PROCEDURE [08/2015 - 08/2019]

Result

Result: 

NEXT 

See step  8

Refer to Problem Symptoms Table.

Refer to PROBLEM SYMPTOMS TABLE [08/2015 - 08/2017] 

Result

Result: 

NEXT 

See step  9

Result

Result: 

NEXT 

See step  10

Refer to Terminals of ECM.

Refer to TERMINALS OF ECU [08/2015 - 08/2017] 

Result

Result: 

NEXT 

See step  11

Result

Result: 

NEXT 

See step  12

Result

Result: 

NEXT 

See step  13

Result

Result: 

NEXT 

END