Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2021 >> Sequoia TRD Pro >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System (Service Information) >> Cruise Control Main Switch >> Installation [08/2015 - 08/2017] >> Procedure

Installation [08/2015 - 08/2017]: Procedure

  1. INSTALL CRUISE CONTROL MAIN SWITCH 
    1. Install the cruise control main switch with the 2 screws.
    2. Connect the connector.
  2. INSTALL STEERING PAD 

    Refer to PROCEDURE - Step 1

  3. INSTALL LOWER NO. 3 STEERING WHEEL COVER 

    Refer to PROCEDURE - Step 2

  4. INSTALL LOWER NO. 2 STEERING WHEEL COVER 

    Refer to PROCEDURE - Step 3

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [08/2015 - 08/2017] ).

    Torque: 5.4 N.m (55 kgf.cm, 48 in..lbf) 

  6. INSPECT SRS WARNING LIGHT 
    1. Inspect the SRS warning light ( . Refer to DIAGNOSIS SYSTEM [08/2015 - 08/2017] ).
scientia non olet · About Mike's Workshop Manuals