Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2021 >> Land Cruiser Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Throttle Body >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE FRONT FENDER SPLASH SHIELD SUBASSEMBLY LH 

    Refer to PROCEDURE - Step 1

  2. REMOVE FRONT FENDER SPLASH SHIELD SUBASSEMBLY RH 

    Refer to PROCEDURE - Step 2

  3. REMOVE NO. 1 ENGINE UNDER COVER SUBASSEMBLY 

    Refer to PROCEDURE - Step 17

  4. DRAIN ENGINE COOLANT 

    Refer to PROCEDURE - Step 4

  5. REMOVE V-BANK COVER SUBASSEMBLY 

    Refer to PROCEDURE - Step 22

  6. REMOVE AIR CLEANER HOSE ASSEMBLY 

    Refer to PROCEDURE - Step 9

  7. REMOVE THROTTLE BODY ASSEMBLY 
    1. Disconnect the 2 water by-pass hoses.
      GTY611129Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the throttle position sensor and control motor connector.
    3. Remove the 4 bolts, throttle body and gasket.
      GTY588680Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the 2 water by-pass hoses from the throttle body.
scientia non olet · About Mike's Workshop Manuals