Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2021 >> Land Cruiser Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Ignition Coil And Spark Plug >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE NO. 2 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 18

  2. REMOVE V-BANK COVER SUBASSEMBLY 

    Refer to PROCEDURE - Step 22

  3. REMOVE AIR CLEANER HOSE ASSEMBLY 

    Refer to PROCEDURE - Step 9

  4. REMOVE AIR CLEANER ASSEMBLY 

    Refer to PROCEDURE - Step 24

  5. DISCONNECT WATER BY-PASS PIPE ASSEMBLY 
    1. Remove the 2 bolts and disconnect the water by-pass pipe from the cylinder head cover and timing chain cover.
      GTY571630Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 bolts and disconnect the water by-pass pipe from the cylinder head cover.
      GTY604880Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE IGNITION COIL ASSEMBLY 
    1. Disconnect the 8 ignition coil connectors.
      GTY588054Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 8 bolts and 8 ignition coils.
  7. REMOVE SPARK PLUG 
    1. Remove the 8 spark plugs.
scientia non olet · About Mike's Workshop Manuals