Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2021 >> Land Cruiser Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Heated Oxygen Sensor >> Inspection [08/2015 - ] >> Procedure

Inspection [08/2015 - ]: Procedure

  1. INSPECT HEATED OXYGEN SENSOR 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 (HT1B) - 2 (+B)
      (for Bank 1)      		 20°C (68°F) 11 to 16 Ω
      1 (HT2B) - 2 (+B)
      (for Bank 2)

      If the result is not as specified, replace the heated oxygen sensor.

      GTY593376Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals