Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2021 >> Land Cruiser Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Crankshaft Position Sensor >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE NO. 2 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 18

  2. REMOVE CRANKSHAFT POSITION SENSOR PROTECTOR 
    1. Remove the 2 bolts and sensor protector.
      GTY570843Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE CRANKSHAFT POSITION SENSOR 
    GTY570842Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
scientia non olet · About Mike's Workshop Manuals