Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2021 >> Land Cruiser Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Camshaft Position Sensor >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE V-BANK COVER SUBASSEMBLY 

    Refer to PROCEDURE - Step 22

  2. REMOVE AIR CLEANER HOSE ASSEMBLY 

    Refer to PROCEDURE - Step 9

  3. REMOVE CAMSHAFT POSITION SENSOR 
    GTY588687Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the sensor connector.
    2. Remove the bolt and sensor.
  4. REMOVE VVT SENSOR 
    1. Disconnect the 4 sensor connectors.
      GTY610925Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 4 bolts and 4 sensors.
scientia non olet · About Mike's Workshop Manuals