Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2021 >> Land Cruiser Base >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Oil Level Sensor >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE FRONT FENDER SPLASH SHIELD SUBASSEMBLY LH 

    Refer to PROCEDURE - Step 1

  2. REMOVE FRONT FENDER SPLASH SHIELD SUBASSEMBLY RH 

    Refer to PROCEDURE - Step 2

  3. REMOVE NO. 1 ENGINE UNDER COVER SUBASSEMBLY 

    Refer to PROCEDURE - Step 17

  4. REMOVE NO. 2 ENGINE UNDER COVER 

    Refer to PROCEDURE - Step 18

  5. DRAIN ENGINE OIL 

    See step  1

  6. DISCONNECT OIL COOLER TUBE 

    Refer to PROCEDURE - Step 53

  7. REMOVE ENGINE OIL LEVEL SENSOR 
    1. Disconnect the oil level sensor connector.
    2. GTY384794Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Remove the 4 bolts and oil level sensor.

    3. GTY383057Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      TEXT IN ILLUSTRATION

      *1 Cutting Position
      *2 Supply Part

      Cut off the gasket as shown in the illustration.

    4. Remove the gasket from the oil level sensor.

      HINT: 

      After cutting away the parts of the gasket shown in the illustration, remove only the outer part of the gasket.

scientia non olet · About Mike's Workshop Manuals