Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2021 >> Land Cruiser Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Front Power Seat Control System - Diagnostics & Symptom Tests >> Front Power Seat Control System >> Customize Parameters [08/2015 - ] >> Procedure

Customize Parameters [08/2015 - ]: Procedure

  1. CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM 

    HINT: 

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Record the current settings before customizing.
    1. Customizing with the Techstream.
      1. Connect the Techstream to the DLC3.
      2. Turn the engine switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Smart Key/Access.
      5. Select the setting by referring to the table below.
        SMART KEY/ACCESS

        Display Default Content Setting Relevant ECU
        Seat position/Tilt & Telesco memory recall setting D Door This customize function switches the condition of the seat position and Tilt & Telesco memory recall. Possible recall activation parameter "D-door unlock and open by smart system" or "Any door unlock and open with smart system" D-Door / ANY Door Main Body ECU (Multiplex Network Body ECU)
scientia non olet · About Mike's Workshop Manuals