Jam Protection Function does not Operate [08/2013 - ]: Procedure
WARNING: This page is about a different car, the 2018 Toyota Corolla, 2017 Toyota Corolla, 2016 Toyota Corolla, 2015 Toyota Corolla, and 2014 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM INITIALIZATION (FOR DRIVER DOOR)
- Initialize the power window regulator motor assembly (for driver door).
Refer to INITIALIZATION [08/2013 - 08/2016] Refer to INITIALIZATION [08/2016 - ]
Result
Proceed to NEXT
Result: 1
NEXT
See step 2
- Initialize the power window regulator motor assembly (for driver door).
- CHECK POWER WINDOW CONTROL SYSTEM (AUTO UP / DOWN FUNCTION (FOR DRIVER DOOR)
- Check if the power window auto up and down function operates normally.
Refer to OPERATION CHECK [08/2013 - 08/2016] Refer to OPERATION CHECK [08/2016 - ]
OK
Driver door auto up and down function is normal.
Result
Proceed to OK NG
Result: 2
NG
GO TO OTHER PROBLEM (Proceed to Problem Symptoms Table): PROBLEM SYMPTOMS TABLE [08/2013 - 08/2016] , PROBLEM SYMPTOMS TABLE [08/2016 - ]
Result: 1
OK
See step 3
- Check if the power window auto up and down function operates normally.
- CHECK JAM PROTECTION FUNCTION OPERATING RANGE
- Check if the jam protection function operates normally for the driver door power window.
HINT:
The jam protection function will not operate within 4 mm (0.157 in.) of the fully closed position.
OK
Jam protection function operates normally.
Result
Proceed to OK NG
Result: 1
OK
END (PROBLEM DUE TO INITIALIZATION FAILURE)
Result: 2
NG
REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR DRIVER DOOR). Refer to REMOVAL [08/2013 - ]
- Check if the jam protection function operates normally for the driver door power window.