DTC B2313: Glass Position Initialization Incomplete [08/2013 - ]: Procedure
WARNING: This page is about a different car, the 2018 Toyota Corolla, 2017 Toyota Corolla, 2016 Toyota Corolla, 2015 Toyota Corolla, and 2014 Toyota Corolla. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM INITIALIZATION (FOR DRIVER DOOR)
- Initialize the power window regulator motor assembly (for driver door).
Refer to INITIALIZATION [08/2013 - 08/2016] Refer to INITIALIZATION [08/2016 - ]
Result
Proceed to NEXT
Result: 1
NEXT
See step 2
- Initialize the power window regulator motor assembly (for driver door).
- CHECK DTC OUTPUT
- Turn the ignition switch off.
- Wait for at least 10 seconds, and then turn the ignition switch to ON.
- Check for DTCs.
Refer to DTC CHECK / CLEAR [08/2013 - ]
Body Electrical > D-Door Motor > Trouble Codes
OK
DTC B2313 is not output.
Result
Proceed to OK NG
Result: 1
OK
END (PROBLEM DUE TO INITIALIZATION FAILURE)
Result: 2
NG
REPLACE POWER WINDOW REGULATOR MOTOR ASSEMBLY (FOR DRIVER DOOR). Refer to REMOVAL [08/2013 - ]