Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2021 >> 4Runner TRD Pro >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System Warning Buzzer - Service Information >> Pre-Collision System Warning Buzzer >> Installation [08/2019 - ] >> Procedure

Installation [08/2019 - ]: Procedure

  1. INSTALL PRE-COLLISION CITY BUZZER 
    1. Connect the connector.
    2. Engage the clamp to install the pre-collision city buzzer.
      NOTE:

      If the pre-collision city buzzer has been struck or dropped, replace it with a new one.

      HINT: 

      Make sure to install the pre-collision city buzzer in the correct direction.

  2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY 

    Refer to INSTALLATION [08/2019 - 08/2022] , or refer to INSTALLATION [08/2022 - ]

scientia non olet · About Mike's Workshop Manuals