Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2021 >> 4Runner TRD Pro >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Pre-Collision System Warning Buzzer - Service Information >> Pre-Collision System Warning Buzzer >> Inspection [08/2019 - ] >> Procedure

Inspection [08/2019 - ]: Procedure

  1. INSPECT PRE-COLLISION CITY BUZZER 
    1. Make sure that there is no looseness in the locking part and connecting part of the connector.
    2. Disconnect the pre-collision city buzzer connector.
    3. Check the connector and terminals for deformation and corrosion.

      OK

      No deformation or corrosion.

    4. Connect a positive (+) lead from the battery to terminal 1, and a negative (-) lead to terminal 2 of the pre-collision city buzzer, and check that the buzzer sounds.
      GTY444565Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      OK

      The pre-collision city buzzer sounds.

      If the result is not as specified, replace the pre-collision city buzzer.

scientia non olet · About Mike's Workshop Manuals