Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2020 >> Yaris L, Automatic Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Push-Button Start System - Diagnostics & Symptom Tests >> Push-Button Start System >> Steering Lock Function Does Not Operate [07/2015 - ] >> Contents

Steering Lock Function Does Not Operate [07/2015 - ]: Contents

Description Switch the ignition from ON (engine off or on) to OFF and do not lock the steering when opening/closing the door.
Trouble Area
  • Open circuit in wiring harness between the following terminals:
    • Engine stop and start ECU D6-24 and front door lock link switch (driver's side) terminal F18-8
    • Engine stop and start ECU terminal D4-1 and ground
    • Engine stop and start ECU terminal D6-32 and ground
    • Engine stop and start ECU terminal D4-13 and ground
  • Short to ground in wiring harness between engine stop and start ECU terminal D6-24 and front door lock link switch (driver's side) terminal F18-8
scientia non olet · About Mike's Workshop Manuals