Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2020 >> Supra Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission System - Service Information >> Shift Paddle Switch >> Installation [03/2019 - ] >> Procedure

Installation [03/2019 - ]: Procedure

  1. INSTALL TRANSMISSION SHIFT SWITCH ASSEMBLY 

    HINT: 

    • Use the same procedure for the RH side and LH side.
    • The following procedure is for the LH side.
    1. Thread the transmission shift switch assembly into the steering wheel.
    2. Connect connectors and lock.
    3. Tighten down the T20 bolt.

      Torque: 2.0 N*m (20 kgf*cm, 18 in.*lbf) 

  2. INSTALL STEERING WHEEL ASSEMBLY 

    Refer to INSTALLATION [03/2019 - ]

scientia non olet · About Mike's Workshop Manuals