Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2020 >> 86 Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System (Service Specifications) >> Fa20 Fuel >> Service Data [06/2016 - ] >> Service Data [06/2016 - ]

Service Data [06/2016 - ]

Fuel pressure 350 to 500 kPa (4.0 to 5.0 kgf/cm2 , 51 to 73 psi)
Fuel pressure : at fuel pressure remains for 5 minutes after engine has stopped 147 kPa (1.5 kgf/cm2 , 21 psi) or more
Fuel pressure (for high pressure) : at engine warm up and idle 3000 to 5000 kPa (30.6 to 51.0 kgf/cm2 , 435 to 725 psi)
Fuel injector (for port injection)
Resistance at 20°C (68°F) 12 Ω
Injection volume 84 to 103 cc(5.1 to 6.3 cu.in.) per 15 seconds
Difference between each injector 19 cc(1.2 cu.in.) or less
Fuel drop 1 drop or less per 22 minutes
Fuel Injector (for direct injection)
Resistance at 20°C (68°F) 1.9 Ω
Fuel pressure sensor
voltage Terminal 3 (VOUT1) and 2 (GND)
: Apply 5 V between terminals 4 (VCC) and 2 (GND)
Approximately 0.5 V
Fuel pump
Resistance at 20°C (68°F) 0.2 to 3.0 Ω
Fuel pump (for high pressure)
Resistance at 20°C (68°F) 1.19 to 1.39 Ω
Fuel sender gauge assembly (Main)
Resistance Float Level F 6.5 to 8.5 Ω
Float Level E 168 to 172 Ω
Fuel sender gauge assembly (Sub)
Resistance Float Level F 5.5 to 9.5 Ω
Float Level E 236 to 244 Ω