Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2019 >> Tundra TRD Pro >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control / Dynamic Control Systems (Service Information) >> VSC Off Switch >> Removal [08/2017 - ] >> Procedure

Removal [08/2017 - ]: Procedure

  1. REMOVE INSTRUMENT SIDE PANEL LH 

    Refer to PROCEDURE - Step 5 [08/2017 - 08/2019], or refer to PROCEDURE - Step 5 [08/2019 - ]

  2. REMOVE FRONT DOOR SCUFF PLATE LH 
    1. for Double Cab:

      (Refer to PROCEDURE - Step 7 [08/2017 - 08/2018], or refer to PROCEDURE - Step 7 [08/2018 - 08/2019], or refer to PROCEDURE - Step 7 [08/2019 - ])

    2. for CrewMax:

      (Refer to PROCEDURE - Step 9 [08/2017 - 08/2018], or refer to PROCEDURE - Step 9 [08/2018 - 08/2019], or refer to PROCEDURE - Step 9 [08/2019 - ])

  3. REMOVE COWL SIDE TRIM BOARD LH 

    Refer to PROCEDURE - Step 11 [08/2017 - 08/2018], or refer to PROCEDURE - Step 11 [08/2018 - 08/2019], or refer to PROCEDURE - Step 11 [08/2019 - ]

  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH 

    Refer to PROCEDURE - Step 11 [08/2017 - 08/2019], or refer to PROCEDURE - Step 11 [08/2019 - ]

  5. REMOVE NO. 2 SWITCH HOLE BASE 

    Refer to PROCEDURE - Step 16 [08/2017 - 08/2019], or refer to PROCEDURE - Step 16 [08/2019 - ]

  6. REMOVE VSC OFF SWITCH 
    1. Disconnect the VSC OFF switch connector.
    2. Using a screwdriver, detach the 2 claws and remove the VSC OFF switch from the No. 2 switch hole base.
      GTY569666Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals