Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2019 >> Tundra TRD Pro >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control / Dynamic Control Systems (Service Information) >> VSC Off Switch >> Inspection [08/2015 - ] >> Procedure

Inspection [08/2015 - ]: Procedure

  1. INSPECT VSC OFF SWITCH 
    1. Measure the resistance according to the value(s) in the table below.
      GTY244937Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance

      Tester Connection Switch Condition Specified Condition
      6 - 9 Pressed Below 1 Ω
      Not pressed 10 kΩ or higher

      If the result is not as specified, replace the VSC OFF switch.

scientia non olet · About Mike's Workshop Manuals