Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2019 >> Prius Prime Advanced >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Throttle Body >> Inspection [09/2016 - ] >> Procedure

Inspection [09/2016 - ]: Procedure

  1. INSPECT THROTTLE BODY ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY593117Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Throttle Body Assembly)

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 (M-) - 2 (M+) 20 °C (68 °F) 0.3 to 100 Ω

      If the result is not as specified, replace the throttle body assembly.

scientia non olet · About Mike's Workshop Manuals