Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2018 >> Tacoma TRD Pro, Automatic Trans >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Service Information) >> Steering Angle Sensor >> Removal [08/2015 - ] >> Procedure

Removal [08/2015 - ]: Procedure

  1. REMOVE SPIRAL CABLE SUB-ASSEMBLY WITH SENSOR 

    Refer to REMOVAL [08/2015 - ]

  2. REMOVE STEERING SENSOR 
    1. Disengage the 6 claws and 2 pins, and remove the steering sensor from the spiral cable sub-assembly.
      NOTE:

      Do not damage the claws and pins of the spiral cable sub-assembly.

      GTY859920Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About Mike's Workshop Manuals