Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Toyota >> 2017 >> Yaris iA Standard Trans >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Smart Key System - Diagnostic Codes & Symptom Tests >> Smart Key System >> Symptom Tests >> Steering Lock Function Does Not Operate >> Contents

Steering Lock Function Does Not Operate: Contents

Description Switch the ignition from ON (engine off or on) to OFF and do not lock the steering when opening/closing the door.
Possible Causes
  • Open circuit in wiring harness between the following terminals:
    • Engine stop and start ECU D6-24 and front door lock link switch (driver's side) terminal F18-8
    • Engine stop and start ECU terminal D4-1 and ground
    • Engine stop and start ECU terminal D6-32 and ground
    • Engine stop and start ECU terminal D4-13 and ground
  • Short to ground in wiring harness between engine stop and start ECU terminal D6-24 and front door lock link switch (driver's side) terminal F18-8
scientia non olet · About Mike's Workshop Manuals